Sort by name | Date
Demobilizing Construction Sites Safely Using NFPA 241

Demobilizing Construction Sites Safely Using NFPA 241

Due to COVID-19, construction sites are being shut down all over the country. Abandoned and unprotected construction sites pose a risk to the community. During this shutdown it is the goal of the fire service that builders leave their construction site as reasonably fire safe as possible. This ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Header Design Per 2015 WFCM Engineered and Prescriptive Provisions

Header Design Per 2015 WFCM Engineered and Prescriptive Provisions

The 2015 Wood Frame Construction Manual (WFCM) is referenced in the 2015 International Building Code and 2015 International Residential Code. For WFCM load calculations, Minimum Design Loads for Buildings and Other Structures (ASCE 7-10) is used. The 2015 WFCM includes design information for wind...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Principles of Fire and Connection Design & Special Inspection

Principles of Fire and Connection Design & Special Inspection

Changes to the 2021 International Building Code allow for construction of mass timber buildings with larger heights and areas than is currently permitted in Types III, IV, and V construction. This presentation will provide an overview of fire design of mass timber building elements and ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Special Inspections for Wood Construction (2018 IBC)

Special Inspections for Wood Construction (2018 IBC)

The International Code Council’s (ICC) International Building Code (IBC) Chapter 17, titled Structural Tests and Special Inspections, will be covered in this program.  This presentation provides background on special inspections for wood construction, in addition to discussion on related topics ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Wood Diaphragm Design

Wood Diaphragm Design

The 2018 International Building Code (IBC) specifies that structures using wood-framed shear walls and diaphragms to resist wind, seismic and other lateral loads shall be designed and constructed in accordance with AWC’s 2015 Special Design Provisions for Wind and Seismic (SDPWS). Calculation of ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Wood-Frame Shear Walls and SDPWS

Wood-Frame Shear Walls and SDPWS

Experimental studies of cyclic performance of wood-frame shear walls give insight into structural performance and have informed recent changes implemented in the 2021 Special Design Provisions for Wind and Seismic (SDPWS). Experimental results for 10d short nails, shear wall end post details, and...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Brief Introduction to Wood Material Science: Wood as a Structural Engineering Material

Brief Introduction to Wood Material Science: Wood as a Structural Engineering Material

Wood material science influences its behavior from harvest through the use phase and beyond. This course will provide an introduction to wood material science, wood-moisture relations, and wood anatomy. The types of wood products structural engineers may use in designs, and the standards ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Mass Timber Structures: Codes and Adoptions

Mass Timber Structures: Codes and Adoptions

With encouragement from the U.S. wood products industry, in 2016, the International Code Council (ICC) formally began to explore the feasibility of adding provisions for tall mass timber buildings in the U.S. model building codes.  Since that time, the ICC Tall Wood Building (TWB) Ad Hoc ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Cross Laminated Timber Shear Wall Example

Cross Laminated Timber Shear Wall Example

New provisions for Cross-Laminated Timber (CLT) shear wall design are included in the 2021 Special Design Provisions for Wind and Seismic (2021 SDPWS), the culmination of many years of research and testing. This program will present a design example for a CLT shear wall, including panel capacity,...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
2018 IBC Essentials for Wood Construction

2018 IBC Essentials for Wood Construction

Based on the popular Code Conforming Wood Design (CCWD), a joint publication of the American Wood Council (AWC) and the International Code Council (ICC), this presentation concisely summarizes the 2018 International Building Code (IBC) for commercial and multi-family residential construction. It ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
2018 IRC Significant Changes to Deck Provisions

2018 IRC Significant Changes to Deck Provisions

This webinar introduces basic design and construction methods for single-story residential wood decks focusing on the significant changes for the 2018 IRC. The vertical and lateral load paths of conventional residential decks are addressed in the 2018 International Residential Code. Specific ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
2018 Wood Frame Construction Manual Changes - STD350

2018 Wood Frame Construction Manual Changes - STD350

The Wood Frame Construction Manual (WFCM) for One- and Two-Family Dwellings (ANSI/AWC WFCM-2018) has been updated and is referenced in the 2018 International Building Code (IBC) and 2018 International Residential Code (IRC). The 2018 WFCM uses gravity and lateral loads based on ASCE 7-16 Minimum ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
CLT Stands Up - A Look at CLT Wall Design

CLT Stands Up - A Look at CLT Wall Design

Even before cross-laminated timber (CLT) was recognized in the 2015 IBC, there was growing interest to use it in the US by designers seeking a sustainable construction product, with a reduced on-site construction time, all while exploiting the natural beauty of wood to provide a pleasing ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Demystifying Diaphragm Design

Demystifying Diaphragm Design

The 2018 International Building Code (IBC) specifies that structures using wood-framed shear walls and diaphragms to resist wind, seismic and other lateral loads shall be designed and constructed in accordance with AWC’s 2015 Special Design Provisions for Wind and Seismic (SDPWS) or 2018 Wood ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Outcomes of ICC Tall Wood AdHoc Committee: Mass Timber Provisions in the 2021 I-Codes

Outcomes of ICC Tall Wood AdHoc Committee: Mass Timber Provisions in the 2021 I-Codes

In early 2016, the ICC Board of Directors approved the creation of an ad hoc committee to explore the building science of tall wood buildings with the scope being to investigate the feasibility of and take action to develop code changes for tall wood buildings. Since that time, the Tall Wood ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Significant Wood Design and Construction Changes to the 2018 IBC and NDS

Significant Wood Design and Construction Changes to the 2018 IBC and NDS

The 2018 International Building Code (IBC) published by the International Code Council and the National Design Specification® (NDS) for Wood Construction published by the American Wood Council are both now available. This presentation will provide an overview of the significant changes to wood ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Design of Bolted Connections

Design of Bolted Connections

This course will feature a bolt design example utilizing AWC's 2015 National Design Specification® (NDS®) for Wood Construction. Topics will include connection design philosophy and behavior, an overview of 2015 NDS provisions related to bolt design including Appendix E for local stresses in ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU