Sort by name | Date
Pre-Planning and Fire Suppression of Buildings Under Construction

Pre-Planning and Fire Suppression of Buildings Under Construction

This program is designed to provide background and information to fire departments that may experience the construction of large area buildings in their community. Many fire departments have limited experience in planning and response to these complex buildings. This requires a thorough ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Significant Wood Design and Construction Changes to the 2018 IBC and NDS

Significant Wood Design and Construction Changes to the 2018 IBC and NDS

The 2018 International Building Code (IBC) published by the International Code Council and the National Design Specification® (NDS) for Wood Construction published by the American Wood Council are both now available. This presentation will provide an overview of the significant changes to wood ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Wind Solutions - Perforated Wood Structural Panel Shear Walls

Wind Solutions - Perforated Wood Structural Panel Shear Walls

AWC's 2015 Special Design Provisions for Wind and Seismic (SDPWS), 2015 Wood Frame Construction Manual (WFCM), and 2015 WFCM High Wind Guides contain provisions for the design of perforated wood structural panel shear walls. This presentation will provide examples of perforated shear wall design ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Code Conforming Wood Design & Fire Resistance Rated Wood Frame Assemblies: Fire Resistance in Floors & Walls (BCD501)

Code Conforming Wood Design & Fire Resistance Rated Wood Frame Assemblies: Fire Resistance in Floors & Walls (BCD501)

Three building features--height, area, and number of stories--will often determine the fire resistive construction requirements of building elements in light wood frame construction. This presentation introduces common types of framing and scoping requirements associated with using wood in ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU, ICC CEU
Expanding Mass Timber Opportunities Through Testing and Code Development

Expanding Mass Timber Opportunities Through Testing and Code Development

Fire testing conducted to justify provisions for three new mass timber construction types in the 2021 I-Codes was performed using an earlier generation of cross-laminated timber (CLT). U.S. model building codes now require compliance with the enhanced fire performance criteria of PRG 320-18. To ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Standard Update: 2021 Special Design Provisions for Wind & Seismic

Standard Update: 2021 Special Design Provisions for Wind & Seismic

The 2021 Edition of Special Design Provisions for Wind and Seismic (SDPWS) is the latest update of the IBC-referenced document. The 2021 SDPWS was developed by AWC’s Wood Design Standards Committee (WDSC) and contains provisions for the design of wood members, fasteners, and assemblies to resist ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Sustainability: AWC's LCA, EPDs, GWP and Other Abbreviations Explained

Sustainability: AWC's LCA, EPDs, GWP and Other Abbreviations Explained

Green Standards are relying more on a product’s environmental impacts, especially embodied carbon and Global Warming Potential (GWP). An understanding of Life Cycle Assessment and Environmental Product Declarations (EPDs) is needed to specify, procure, and use the best products. This webinar will...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Cross Laminated Timber Shear Wall Example

Cross Laminated Timber Shear Wall Example

New provisions for Cross-Laminated Timber (CLT) shear wall design are included in the 2021 Special Design Provisions for Wind and Seismic (2021 SDPWS), the culmination of many years of research and testing. This program will present a design example for a CLT shear wall, including panel capacity,...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Brief Introduction to Wood Material Science: Wood as a Structural Engineering Material

Brief Introduction to Wood Material Science: Wood as a Structural Engineering Material

Wood material science influences its behavior from harvest through the use phase and beyond. This course will provide an introduction to wood material science, wood-moisture relations, and wood anatomy. The types of wood products structural engineers may use in designs, and the standards ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Mass Timber Structures: Codes and Adoptions

Mass Timber Structures: Codes and Adoptions

With encouragement from the U.S. wood products industry, in 2016, the International Code Council (ICC) formally began to explore the feasibility of adding provisions for tall mass timber buildings in the U.S. model building codes.  Since that time, the ICC Tall Wood Building (TWB) Ad Hoc ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Wood-Frame Shear Walls and SDPWS

Wood-Frame Shear Walls and SDPWS

Experimental studies of cyclic performance of wood-frame shear walls give insight into structural performance and have informed recent changes implemented in the 2021 Special Design Provisions for Wind and Seismic (SDPWS). Experimental results for 10d short nails, shear wall end post details, and...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Header Design Per 2015 WFCM Engineered and Prescriptive Provisions

Header Design Per 2015 WFCM Engineered and Prescriptive Provisions

The 2015 Wood Frame Construction Manual (WFCM) is referenced in the 2015 International Building Code and 2015 International Residential Code. For WFCM load calculations, Minimum Design Loads for Buildings and Other Structures (ASCE 7-10) is used. The 2015 WFCM includes design information for wind...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Principles of Fire and Connection Design & Special Inspection

Principles of Fire and Connection Design & Special Inspection

Changes to the 2021 International Building Code allow for construction of mass timber buildings with larger heights and areas than is currently permitted in Types III, IV, and V construction. This presentation will provide an overview of fire design of mass timber building elements and ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Special Inspections for Wood Construction (2018 IBC)

Special Inspections for Wood Construction (2018 IBC)

The International Code Council’s (ICC) International Building Code (IBC) Chapter 17, titled Structural Tests and Special Inspections, will be covered in this program.  This presentation provides background on special inspections for wood construction, in addition to discussion on related topics ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Wood Diaphragm Design

Wood Diaphragm Design

The 2018 International Building Code (IBC) specifies that structures using wood-framed shear walls and diaphragms to resist wind, seismic and other lateral loads shall be designed and constructed in accordance with AWC’s 2015 Special Design Provisions for Wind and Seismic (SDPWS). Calculation of ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Demobilizing Construction Sites Safely Using NFPA 241

Demobilizing Construction Sites Safely Using NFPA 241

Due to COVID-19, construction sites are being shut down all over the country. Abandoned and unprotected construction sites pose a risk to the community. During this shutdown it is the goal of the fire service that builders leave their construction site as reasonably fire safe as possible. This ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Calculating Wind Loads on Low-Rise Structures per WFCM Engineering Provisions

Calculating Wind Loads on Low-Rise Structures per WFCM Engineering Provisions

The Wood Frame Construction Manual (WFCM) for One- and Two-Family Dwellings (ANSI/AWC WFCM-2015) is referenced in the 2015 International Building Code and 2015 International Residential Code. For WFCM wind load calculations, Minimum Design Loads for Buildings and Other Structures (ASCE 7-10) is ...
Learning Hours: 2
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Design Considerations of Wood Frame Structures for Permanence

Design Considerations of Wood Frame Structures for Permanence

When properly designed, wood frame structures will resist damage by moisture and living organisms. Recommendations for control of moisture and protection against decay and insect infestations are contained in AWC's Design of Wood Frame Structures for Permanence, WCD No. 6. Protection of wood ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
DCA3: Fire-Resistance and Sound Ratings for Wood-Frame Assemblies

DCA3: Fire-Resistance and Sound Ratings for Wood-Frame Assemblies

One of the methods for determining fire resistance per section 703.3 in the 2018 International Building Code is fire-resistance designs documented in approved sources. The American Wood Council's Design for Code Acceptance No. 3 (DCA-3), Fire-Resistance-Rated Wood-Frame Wall and Floor/Ceiling ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Wood Structural Panels Designed to Resist Combined Shear & Uplift from Wind Loads

Wood Structural Panels Designed to Resist Combined Shear & Uplift from Wind Loads

AWC’s 2015 Special Design Provisions for Wind and Seismic (SDPWS) and 2018 Wood Frame Construction Manual (WFCM) which are referenced in the national building codes, both contain provisions for wood structural panel shear walls designed to resist shear and uplift forces simultaneously. This ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU