Sort by name | Date
Expanding Mass Timber Opportunities Through Testing and Code Development

Expanding Mass Timber Opportunities Through Testing and Code Development

Fire testing conducted to justify provisions for three new mass timber construction types in the 2021 I-Codes was performed using an earlier generation of cross-laminated timber (CLT). U.S. model building codes now require compliance with the enhanced fire performance criteria of PRG 320-18. To ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Code Conforming Wood Design & Fire Resistance Rated Wood Frame Assemblies: Fire Resistance in Floors & Walls (BCD501)

Code Conforming Wood Design & Fire Resistance Rated Wood Frame Assemblies: Fire Resistance in Floors & Walls (BCD501)

Three building features--height, area, and number of stories--will often determine the fire resistive construction requirements of building elements in light wood frame construction. This presentation introduces common types of framing and scoping requirements associated with using wood in ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU, ICC CEU
The World’s Tallest Mass Timber Tower: A Behind the Scenes Look at Ascent

The World’s Tallest Mass Timber Tower: A Behind the Scenes Look at Ascent

What motivated the development team at New Land Enterprises to create the world’s tallest mass timber tower in downtown Milwaukee? What hurdles did the architecture, fire, and engineering teams face getting approval for this monumental building? What were the logistics of erecting a 25-story, ...
Learning Hours: 1
Provider: WoodWorks
Credits: AIA LU/HSW, ICC CEU
Offset Diaphragm Design

Offset Diaphragm Design

Lateral force resisting systems in in today's  structures are much more complex than they were several decades ago, incorporating multiple horizontal and vertical offsets in the diaphragms, multiple irregularities, and fewer lateral resisting elements. This two part presentation will provide a ...
Learning Hours: 1
Provider: WoodWorks
Credits: AIA LU/HSW, ICC CEU
2015 Special Design Provisions for Wind and Seismic Overview and Changes - STD415

2015 Special Design Provisions for Wind and Seismic Overview and Changes - STD415

Per the International Building Code (IBC), structures using wood shear walls and diaphragms to resist wind and seismic lateral loads shall be designed and constructed in accordance with AWC's Special Design Provisions for Wind and Seismic (SDPWS). This course will discuss the 2015 SDPWS which is ...
Learning Hours: 2
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
2015 WFCM Significant Changes and Introduction to High Wind Guides

2015 WFCM Significant Changes and Introduction to High Wind Guides

Engineering concepts from the 2015 Wood Frame Construction Manual (WFCM), used to develop the 2015 WFCM High Wind Guides, will be covered, along with updates on changes to the 2015 WFCM. The WFCM and High Wind Guides provide designers with time-saving tools using prescriptive solutions (based on ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
2018 IBC Essentials for Wood Construction

2018 IBC Essentials for Wood Construction

Based on the popular Code Conforming Wood Design (CCWD), a joint publication of the American Wood Council (AWC) and the International Code Council (ICC), this presentation concisely summarizes the 2018 International Building Code (IBC) for commercial and multi-family residential construction. It ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
2018 IRC Significant Changes to Deck Provisions

2018 IRC Significant Changes to Deck Provisions

This webinar introduces basic design and construction methods for single-story residential wood decks focusing on the significant changes for the 2018 IRC. The vertical and lateral load paths of conventional residential decks are addressed in the 2018 International Residential Code. Specific ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
2018 Wood Frame Construction Manual Changes - STD350

2018 Wood Frame Construction Manual Changes - STD350

The Wood Frame Construction Manual (WFCM) for One- and Two-Family Dwellings (ANSI/AWC WFCM-2018) has been updated and is referenced in the 2018 International Building Code (IBC) and 2018 International Residential Code (IRC). The 2018 WFCM uses gravity and lateral loads based on ASCE 7-16 Minimum ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Calculating ASD Shear Wall Capacities per 2015 SDPWS Using the Equal Deflection Approach - DES413-3

Calculating ASD Shear Wall Capacities per 2015 SDPWS Using the Equal Deflection Approach - DES413-3

AWC's 2015 Special Design Provisions for Wind and Seismic (SDPWS) is referenced in the _2015 International Building Code (IBC)_ for design of structures using wood shear walls and diaphragms to resist wind and seismic lateral loads. Provisions in the SDPWS contain the equal deflection requirement...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Calculating Gravity Loads for Structures up to 3-Stories per WFCM Engineering Provisions - STD342-2

Calculating Gravity Loads for Structures up to 3-Stories per WFCM Engineering Provisions - STD342-2

The Wood Frame Construction Manual (WFCM) for One- and Two-Family Dwellings (ANSI/AWC WFCM-2015) is referenced in the 2015 International Building Code and 2015 International Residential Code. For WFCM load calculations, Minimum Design Loads for Buildings and Other Structures (ASCE 7-10) is used. ...
Learning Hours: 2
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Calculation of Sound Transmission Parameters for Wood-Frame Assemblies

Calculation of Sound Transmission Parameters for Wood-Frame Assemblies

Building codes stipulate minimum performance requirements regarding noise transmission through common interior walls and floor/ceiling assemblies that separate a dwelling unit from either a public area or an adjacent dwelling unit. In the 2018 International Building Code (IBC), two parameters are...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
CLT Adhesive Tests in Support of Tall Wood Buildings

CLT Adhesive Tests in Support of Tall Wood Buildings

Adhesive bonding of wood laminations allows for the manufacture of large wood members. Adhesives used for this purpose must meet specified levels of resistance to heat at elevated temperatures. This performance is determined through testing. Code-referenced standards currently require such ...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
CLT Stands Up - A Look at CLT Wall Design

CLT Stands Up - A Look at CLT Wall Design

Even before cross-laminated timber (CLT) was recognized in the 2015 IBC, there was growing interest to use it in the US by designers seeking a sustainable construction product, with a reduced on-site construction time, all while exploiting the natural beauty of wood to provide a pleasing ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Construction Fire Safety Best Practices

Construction Fire Safety Best Practices

This program provides information on best practices to assist the Fire Service charged with responsibilities for fire and life safety on a construction site. Builders and building officials will also benefit from the information provided. The purpose is to reduce the risk of injuries and losses ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Demystifying Diaphragm Design

Demystifying Diaphragm Design

The 2018 International Building Code (IBC) specifies that structures using wood-framed shear walls and diaphragms to resist wind, seismic and other lateral loads shall be designed and constructed in accordance with AWC’s 2015 Special Design Provisions for Wind and Seismic (SDPWS) or 2018 Wood ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Design of Connections for Wood Members using the NDS and TR12

Design of Connections for Wood Members using the NDS and TR12

This course will feature techniques for designing connections for wood members utilizing AWC's 2015 National Design Specification® (NDS®) for Wood Construction and Technical Report 12 - General Dowel Equations for Calculating Lateral Connection Values (TR12). Topics will include connection design...
Learning Hours: 2
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Designing for New ASCE 7-16 Wind Loads per the 2018 WFCM

Designing for New ASCE 7-16 Wind Loads per the 2018 WFCM

The Wood Frame Construction Manual (WFCM) for One- and Two-Family Dwellings (ANSI/AWC WFCM-2018) is referenced in the 2018 International Building Code (IBC) and 2018 International Residential Code (IRC). The 2018 WFCM uses gravity and lateral loads based on ASCE 7-16 Minimum Design Loads and ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Fire Tests in Support of Tall Mass Timber Buildings

Fire Tests in Support of Tall Mass Timber Buildings

Fire testing to evaluate the performance of building materials and assemblies used in construction has been a requirement of building codes since the late 19th century. Early in the 20th century, versions of the ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials...
Learning Hours: 1
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU
Outcomes of ICC Tall Wood AdHoc Committee: Mass Timber Provisions in the 2021 I-Codes

Outcomes of ICC Tall Wood AdHoc Committee: Mass Timber Provisions in the 2021 I-Codes

In early 2016, the ICC Board of Directors approved the creation of an ad hoc committee to explore the building science of tall wood buildings with the scope being to investigate the feasibility of and take action to develop code changes for tall wood buildings. Since that time, the Tall Wood ...
Learning Hours: 1.5
Provider: American Wood Council
Credits: AIA LU/HSW, ICC CEU